Sale!

$119.99$149.99

This product is currently out of stock and unavailable.

SKU: QX7 Category: Product ID: 3512

Description

Taranis Q X7 Pre-Order

Our entire inventory of X7s were gone within 1 day of arrival, so we are opening up pre-orders for anyone who wants to ensure their X7, and at a great discount! Normally $149.99, if you want in on the order, we’ll cut you the sweet price of $119.99! Pre-order yours before our ordering closes on March 10th to get in on the order. Great new radio, sweet price!

The Taranis Q X7, or just the X7, is closely based on the Taranis Plus – a radio that has been very well received thanks to its extensive feature set and low price point. For the X7, FrSky has taken a close look at what could be improved, and focused on reducing the sell price. The end result is amazing. With nearly all of the power and features of the Taranis Plus, but a much lower price point.

First off, you will notice the modern case design. While it’s still about the same size as the Taranis Plus, the ergonomics of the radio are definitely improved. When you hold the X7, you will feel the large rubber grips on the back, and notice the gentle angles of the front panel. The switches and sticks are perfectly located for either small or large hands, and the trims are easy to get to as well.The power switch is flush, and must be held down an extended period of time to turn off, so you won’t accidentally turn this radio off in flight! The navigation of the radio’s computer is greatly improved, with a rotary dial on the right of the screen, and 3 buttons to the left.

We’d like to point out one of the cool things about FrSky as a company – typically, when a radio company comes out with a new, lower-priced transmitter, they we severely limit the radio. FrSky does not do this! The X7 has nearly all of the features of the Taranis Plus, Taranis X9E, and even the top of the line ‘Horus’. They all have 16 channels, and can be expanded to 32 channels, FULL telemetry built in, speech, tons of mixing, lots of model memories, logic switches, the ability to base mixes off of telemetry data, external module bay, and so much more. It is much easier for us to tell you what this radio lacks when compared to the Taranis Plus. The X7 has a lower resolution LCD display, no side sliders, you have to install a lipo – it doesn’t come with a battery, and no battery charger. That is about all I can think of.

How about the cost of accessories? We all know that a low price transmitter is not much good if you don’t have a nice selection of receivers and sensors. FrSky now offers one of the largest selections, but if that was not enough, they also have excellent prices on them! You can afford to outfit your fleet, and you will be confident knowing your models are well protected as FrSky’s RF system is rock solid with an excellent reputation. There is a reason people trust their large scale, turbine and competition aircraft to FrSky!

Let’s talk a bit about the battery options. FrSky has always used NiMH based batteries in their radios. They are cheap, work great and have no shipping restrictions, but some folks complain that they rather use lithium based cells. Well, FrSky has listened. The X7 comes with a battery clip that you can drop in normal AA cells into, or you can remove the battery clip and use a 6 cell NiMH or 3S Lipo (we recommend 2s, but they claim 6 to 15Volt input voltage!), Life or other battery pack. It just needs to fit in the battery compartment and have a 2S sized balance style plug (These batteries will need to be charged externally from the radio.) All of the FrSky radios are very efficient, so regardless of what battery you select, you should be rewarded with long battery life.

Are you heavily invested in another RF system? No worries, the X7 has a normal JR style module bay on the back that will accept modules for other transmitting protocols. In the model setup you simply tell the system if you are using the external module, and it shuts down the internal FrSky module. Now you can use your UHF, Futaba, Spektrum, JR, Aisin, and other receivers if you have a transmitter module that fits in a JR style module bay.

The X7 ships with OpenTX 2.2 an open-source software that has been developed by hobbyist’s in the R/C community. The programmers of the transmitter’s firmware and companion software which will run on Linux, Windows, and Macintosh are very receptive to input and requests from users. If you can think of it, chances are the X7 is capable of doing it. (As of this writing, OpenTX 2.2 is not in full release, so the companion software is not yet fully compatible with older radios and only available in a beta build for Windows. We are told it is very close to full release.)

This is getting a little long, so here are the bullet points.

Included in the package:

  • Taranis Q X7 transmitter (Available in Snowy White or Piano Black)
  • Neck Strap & adjustable balance bar
  • Basic instruction sheet
  • battery clip for AA cells (rechargeable NiMH recommended)
  • Micro SD card is not included. (a 2GB card is plenty)

Features:

  • Operating Voltage Range: 6~15V (2S, 3S Lipos are acceptable)
  • Operating Current: 210mA maximum  (RF module and backlit on)
  • Operating Temperature -10~45℃
  • Compatibility: FrSky X series (recommended), L,S D, & V8-II series receivers. Something for everyone!
  • Long range system capable of up to 2 times the range of current 2.4 systems
  • Quad Ball Bearing Gimbals (hall effect option coming soon!) Ships with both sticks centering, easy to change modes and centering.
  • Model files compatible with TARANIS X9D Plus
  • Full Telemetry RSSI alarms (warns you of signal reception problems before disaster can strike)
  • Haptic Feedback – vibration
  • 16 channels (32 channels when combined with an external XJT module)
  • 60 model memories
  • 64 mixers, 9 flight modes
  • 16 custom curves with 2-17 points each, 64 logic switches
  • Voice or custom sound alerts
  • USB and SD card slot for system expansion
  • Quad bearing gimbals that are silky smooth
  • State-of-the-art open source software (OpenTX)
  • 128 X 64 backlit LCD screen
  • Real-time data logging
  • Receiver lock (program locked to aircraft – limited to FrSky receivers running D16 mode)
  • JR Style module bay for additional RF modules and so much more
  • Selectable stick modes (1, 2, 3, or 4)
  • 2 timers, count up or down, throttle %, talking, etc.
  • Trims – Adjustable from course to extra fine with extended and exponential trims
  • Standard trainer jack
  • ARM Cortex M3 32-bit 120MHz
  • Integrates with CompanionTX – a FREE computer program that is a transmitter setup buddy. CompanionTX (Windows/Mac/Linux) is used to set-up models with the wizard, save, edit and share your models and settings as well as simulate your transmitter or model setup.
  • USB connection for firmware upgrades, sound editing, access the microSD card and integrate with CompanionTX
  • Multiple language support (Radio arrives configured for English language)
  • Open source community-driven firmware, so unlike with major manufacturers if you need a special function or have good improvement suggestions just raise your voice, and don’t be surprised if it’s implemented a couple of days later! Visit http://www.openrcforums.com to meet the developers!

In the video below we show you how to adjust your gimbals. When removing the centering on the throttle gimbal, you do not need to adjust that first spring they show in this video, and please be very careful when closing the case, the pins in the module bay need to be carefully aligned, do not force the case shut! You can easily bend the module pins, and this is not covered under warranty.

Additional information

Weight 3 lbs
Color

Black, White

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.